How to protect the drain from hair accumulation

Everyone knows how quickly and hopelessly clogged hair drain. Owners of luxurious hair were faced with the need to urgently remove the blockage. Are there simple methods of control and prevention? Yes, you can quickly get rid of trouble using a light trick with a screed or wire.

Screed Method

Shreds of hair tend to become tangled and cling to themselves, creating a tangle that clogs the drain of water.They are struggling with this phenomenon with the help of a nylon clamp. They make peculiar traps that capture hair, preventing them from entering the sewers.

It is important to remember that timeliness and prevention will help to avoid an emergency.

  1. So, we take two screeds, for example, 3.6 * 300 mm, they are sold in any hardware store. If not, then it is permissible to take a different size, the final effect will not change from it.
  2. It is necessary to make a ring on the end, it is useful for fixing.
  3. With a clerical or ordinary knife, cut small serifs along the entire length. The more of them, the better.
  4. Take any metal tube and wrap the screed around it.
  5. Secure with tape or tape at both ends, otherwise it will unfold, taking its original shape.
  6. Warm up with a hairdryer for about 3-5 seconds, but do not overdo it, otherwise the plastic will become brittle and the probability of breaking it increases.
  7. In the end, both parts should take a wavy shape.
  8. Install sinks or bathtubs with ringlets up through the drain.

Everything! They will catch hair, and it is recommended to brush after each bath. For this, the structure is pulled out from the drains by the clamps, the catch is carefully removed and returned to its place.

Twisting wire

The method is spied on by plumbers who come to clean the sewer with a special durable and flexible cable.

The cable is made of durable steel, a spiral is cut on it, and some species have a brush at the end. It easily penetrates into the most inaccessible places, removing accumulated dirt from the walls.

As an analogue, you can use wire.

  1. Twist the wire and make a small hook out of it. For example, a copper wire 1.5 mm thick is suitable.
  2. Push gently into the drain.
  3. Turn around the axis 2-3 times and pull out everything that hooks the hook. Some experts advise combining translational and rotational movements to achieve a better result.
  4. Repeat if necessary.
  5. Rinse the drain with clean water.

The procedure should be carried out on a regular basis so as not to accumulate blockage. Care must be taken, otherwise there is a risk of damage to the fragile plastic structures with metal parts.

Interestingly, in a good drain, the correct installation of the bath is very important. If she stands on the podium, then the angle increases, and the water leaves faster, giving the garbage a chance to catch and stay.

Prevention Tips

There is nothing simpler than a set of elementary measures to prevent blockages.

  • Put a grate or wire mesh in the drain hole. They block siphon of small debris and hair. Now the stores offer to buy interesting decorative options in various colors.
  • At least 1 or 2 times a month, carry out prophylaxis with a plunger and a spill of hot water, this helps remove adhering dirt.
  • Once a quarter, pour special funds, for example, "Mole" or use folk cleaning methods.
  • Install hair catchers in the form of clips, wires or chains. Alternatively, make a "trap" according to the above example.

Using elementary "safety rules", we will no longer be faced with an emergency, we will not call the plumbing, late for work, and will not worry about blockages.The proposed method of "trap" from the screed is quite effective, and for reliability it is combined with other methods of maintaining order and cleanliness of the sewage system.

Watch the video: High-Speed drain dome cover (March 2024).

Leave Your Comment