How to tin up the wires from the headphones

Headphones are in high demand today and it is quite difficult for many to do without them. This accessory makes it possible to listen to music in a crowded minibus, watch a movie at home while everyone is sleeping or chat with loved ones using various programs, in a huge assortment provided in modern epp markets.

But sometimes the breakdown of a particular technique violates the usual rhythm of life and deprives many of the possibilities. It’s not necessary to immediately buy new headphones - you can try to fix them yourself. This will require tinning the wires.

What you need to seal the wires of the headphones

First of all, we will decide on the necessary materials, which should be prepared in advance. During operation, they should always be at hand.

So you will need:

• soldering device;
• rosin;
• solder;
• technical knife;
• aspirin.

About what tablets are for, you will learn a little later from the step-by-step instructions. You can even use expired ones that have been lying around in the apartment for a long time and are no longer needed by anyone.

In addition, identify a broken headphone. In most cases, this is a thinning of the wire or some kind of mechanical damage. This could happen during a strong blow or a fall of the accessory.

IMPORTANT! Before starting work, carefully read the instructions to understand what and why you need to do. This is especially important for those who have never previously done anything like this and do not have special skills and knowledge in the field of technology.

How to tin a wire of headphones

When everything you need is ready, you can begin to work:

1. First you need to cut the cable and it is better to do it with a decent margin to be safe. Next, you need to find the right wire - they differ in color. Blue or yellow indicates that this is a common cable, and green and red to the right and left earphones, respectively.
2. After this, be sure to remove the insulation. Sometimes it is this action that causes difficulties for beginners, but in fact such a procedure is extremely simple. Try to ensure that the operation involves no more than 0.5 cm from the edge of the wire. Different types of insulation, polymer or varnish, are removed by different tools. A construction knife will cope with the polymer, but in order to strip the varnish, you need a soldering iron.
3. Then you need to heat the soldering iron and grab a small particle of solder. The ends of the wires must be installed on the rosin and distribute the solder over the entire surface. It is important that the composition is distributed evenly. Now you can solder the wires to each other.

REFERENCE! An aspirin tablet will be needed if it is necessary to combine stripping and tinning of wires. Then put the cable on the aspirin and carry out the necessary actions with a soldering iron. The lacquer coating will thus completely disappear.

Now you know how you can tear the headphone wires on your own, which will return them to working condition. Even a beginner can easily cope with this task, so do not rush to throw out a broken accessory - buying a new device will not solve the problem until the end and soon you may again experience a breakdown. Knowing how to fix it, you can save.