How to strengthen the antenna for the TV

Watching TV after a busy day is one way to relax. To watch TV at home, use a television or satellite dish as a receiving device. Both types are different, so a conventional antenna allows you to watch up to 20 channels of on-air TV, and satellite much more. But much more unpleasant when there is interference with the image or even broadcasting. It's not always about the TV, often the problem arises from a weak signal.

The principle of operation of the antenna for the TV

Intermittent broadcasting distorts the image and sound, but the problem is not always on the side of the television tower. The problem most often lies in the receiving device. You can try to amplify a weak signal to avoid noise and interference during viewing. Consider both types:

1. Satellite dish - gain depends on how wide it is in diameter. There are several varieties, and all of them are street.
2. Television can be indoor and outdoor (these are installed on the roofs of houses).

A good signal in the second case depends on the proximity of the broadcast tower, design and the presence of an amplifier. In other words, the antenna receives, converts it through the receiver, and the image appears on the TV screen.

IMPORTANT! The signal quality does not depend on the type of television cable (if it is damaged, the sound and picture will not be at all). Therefore, if there are problems with the reception of broadcasting, it is necessary to check the antenna.

Is it possible to amplify the signal of the TV antenna

Additionally, you can amplify the signal using the usual transfer of the device to another place - closer to the location of the tower. As a rule, it can be seen from afar by the red lights. If it does not help, then it is recommended to purchase and install an additional amplifier.

IMPORTANT! It is safe to repair or upgrade a television antenna; it does not conduct electric current. However, you should take care of security if it is located at a height - the roof or wall of the house.

Image quality is sometimes disturbed by noise looking like snow - bright white dots. If such a problem occurs, then this is definitely the noise of a television amplifier. You need to change the orientation by turning towards the tower or even increase the height of its installation.

If the noise looks like stripes, constant freezes or jittery pictures, then the TV is subject to interference. For example, this happens if there is a mobile phone nearby or another household appliance is located. But if home equipment can be turned off or moved, then the problem with external sources (radio signal, electric trains, cell towers, etc.) simply cannot be solved. It is recommended to change the antenna to a view with a narrow focus and high sensitivity specifically to the broadcast signal.

TIP! A simple way is to reduce the length of the television cable. In rare cases, this improves the signal.

How to strengthen the antenna for the TV yourself

There are three simple ways to amplify the signal with your own hands. They do not require large expenses or specialized knowledge:

1. Use an amplifier - you can purchase it in a store and install it yourself.
2. Use combined devices - they will give the best signal. It’s best to place them as high as possible.
3. To expand the coverage of the reception - as in the case of the plate, the diameter matters. It is possible to supplement a conventional antenna with a thin wire, having fashioned a body around it segments according to the type of beams.

You can simply transfer the antenna, finding the best place to receive the signal. Such amplification methods are universal and, most likely, they will be enough to improve the picture on the TV screen.