How to disassemble a computer chair

No one is immune from various breakdowns of their furniture. Buying a new device every time is an expensive option. Therefore, in this article we will consider how you can transform from an old chair into a completely new one, while not using large expenses and difficulties.

How to disassemble a computer chair - procedure

There are several so-called sources of computer chair breakdown. Accordingly, separate methods of elimination should be applied to each of them. The most common failure is gas lift. To eliminate it, you need to make a replacement. To do this, you should arm yourself with the following tools:

• Screwdriver.
• Hammer.
• Grease.
• Pliers.
• Bolt.

After cooking, you can proceed to the main part. Following the further instructions in the presented sequence, you can easily update the structure:

• The first step is to remove the wheels. Then you can remove the back, unscrewing all the fasteners. At this stage, do not forget about the armrests - they also need to be removed from the main part.
• Then you should pull off the seat by unscrewing the screws on the bottom. After the described manipulations, you will be able to move the protective cover. This will help you find gas lift. It will have to be knocked out with a hammer. It may happen that the process will go tight, for this it is worth using technical grease and continue with the initial steps.
• As for the cross, this is the execution of similar steps. However, the main difference is the use of pliers. The process itself presents itself with a gentle tapping of parts.

ATTENTION! Make sure that the gas chamber is intact (it is located in the center of the structure). You can also apply grease to facilitate operation.

• In conclusion, it will be necessary to assemble the entire structure back. That is, screwing the seat to its original location, collecting the crosspiece, pre-installing the wheels and updating the gas lift through the corresponding recess. Then it is necessary to put on a casing and fully attach the seat.

How to disassemble the back

Most people often ask themselves the question of removing the back of the structure. Most often it is necessary for the constriction of the base. To do this, you do not need to disassemble the structure completely. It will be enough to disassemble the necessary individual parts. The only thing that can be mentioned is the possible difference in the fastening of each model. However, as is noticeable, the principle of all is more or less similar.Disconnecting the back of the chair is a simple process. You just need to arm yourself and unscrew the part on the back, after which the element can easily be tilted away from you. Now it is possible to remove the casing and replace it with a fresh one, having previously unfastened the latches with neat movements.

What difficulties can you face

Before work, you should understand what difficulties you may encounter. Such a list includes the following points:

• During prolonged use, the parts can connect to each other in such a way that it will be difficult to separate them. To prevent this, it is recommended to use special grease and electrical appliances.
• Since there are small components in the design, they should be carefully monitored. To do this, it is advisable to call an assistant who will perform such a function.
• Due to the complexity of the device, parsing can be difficult. Therefore, it is no exception that additional tools will be needed. When using them, do not forget about safety measures. All actions must be performed as accurately and accurately as possible.