How to set up a hair clipper

More and more consumers do not want to visit hairdressers, and prefer to get their hair cut at home. This is not only convenient, but also beneficial, because you just need to buy a machine and forget about the regular waste of visiting the salon.

But unfortunately, not all users are aware of the rules for setting up equipment, which in the future to avoid its failure. Therefore, we decided to give you detailed information about the adjustment of devices, along with the features of proper operation.

Why you need to set up a hair clipper

Many do not understand why to adjust the machine, because at first glance, it can work without tuning and does not require care. This is true, but ... In this case, the device will work for only a few haircuts.

But if you set up the machine and constantly look after it in accordance with the instructions, it will delight you with stable operation for a long time, and you do not need to look for specialists for repair work.

Important! Some units with prolonged use may begin to bite or pull out hair, as well as to shock. In such a situation, you must urgently perform maintenance on the device.

In addition to the information mentioned, in case of untimely adjustment and maintenance of equipment, it can cause a number of other inconveniences, as a result of which it will no longer be possible to create a stylish and modern hairstyle. And this suggests that proper adjustment is the key to comfortable operation. And if you want to use the machine without inconvenience, it is strongly discouraged to ignore this procedure.

How to adjust the blades correctly

Setting up a hair clipper, namely adjusting knives, is a necessary procedure for comfortable operation of the device. It is necessary only in situations of poor performance (the machine mows badly, bites its hair, etc.).

How to adjust the hair clipper? Before adjusting the knife, you will need to thoroughly clean it from any dirt and hair residues. To do this, use a regular screwdriver to unscrew the bolts, remove the blade and clean it.

Then you need to put the blade in its original position and grease them with oil, the tube of which must be included with the main equipment. After that you can start the haircut again without inconvenience, and make yourself a modern and stylish hairstyle.

Nozzle adjustment

How to set up a hair clipper? Installing nozzles is an extremely simple procedure, requiring the following algorithm of actions.

1. Lubricating the knife block of the device (2-3 drops of oil).
2. Move the control lever to the lower position.
3. Selection of the length of the haircut with the lever.
4. Setting the lever to the optimal position.
5. The choice of nozzles.
6. Installing it on the knife block with a light touch (a small click should sound, indicating proper placement).

Important! Initially, the length is selected, and after that the lever moves. In other situations, the settings will be reset.

That's all. Now you just have to connect the device to the network and start cutting.

Rules for car care so that it does not fail

Correct care can extend the life of any device. Fortunately, hair clippers are no exception.

1. Before using the unit, read the instructions.
2. Do not use the appliance if you are afraid to break it.
3. It is necessary to lubricate the machine with oil on a regular basis.
4. It is impossible to use force at the moment of fixing the blades, since this can lead to damage to the equipment.

Using a hair clipper is very simple. The main thing is to follow all the recommendations and rules for caring for the device!