The printer thinks long before printing

There is often a problem when you have to wait while the printer thinks for a long time before printing documents. Few know what it is connected with. Some people think that the device is outdated. But it is not. It is better to solve this problem now, because such a nuisance can cause potential damage.

Why the printer thinks long before printing

The problem looks like this, the printer turned on, prepared the pages for printing, but does not respond to printing itself, or carries it out a few minutes after sending the document. This means that some kind of error has appeared that does not allow the printer to start printing.

There are several reasons for this phenomenon:

1. The wrong settings are set.
2. Outdated driver.
3. The problem is nutrition.
4. Breakage or dusting of the cable or USB port.
5. The problem with the cartridge.
6. Dirty contacts.

How to fix the problem

The reason for the slow work can be for many reasons.

Nutrition

Do the following:

1. Disconnect the device from the network.
2. Remove all filters and carry.
3. Insert the power cord directly into the outlet.

USB connector issues

If it gets dust, information is transferred more slowly. Do the following:

1. We take out the cable from the port.
2. Wipe the dust with a dry cloth.
3. If dirt has adhered to the port, you can use a cotton swab with alcohol.

Cartridge problem

This problem is often found in cheap models. If you bought a cartridge from another manufacturer, it is better to replace it with your own (the one that is suitable for this brand of device).

Contacts are dirty

Do the following:

1. Set the printheads in the replacement position. Extract them.
2. Clean the contacts and nozzles. It is better to use clean wipes soaked in clean water.
3. Put the cartridge in place.
4. Turn on the printer.

Configure the device, and update the driver.

To begin, let's try to set the power saving settings. Do the following:

1. On the control panel, look for the Menu button. Click on it.
2. We select the general settings.
3. Now select the section Energy Saving. We are looking for it in the list.
4. To solve the problem, remove the marker from the entry to the energy-saving mode.

If the device still works slowly, you should update its drivers. Install the latest version. Do the following:

1. Right click on My Computer.
2. Open Properties.
3. On the panel we are looking for the Device Manager. Located on a small panel on the left side.
4. There will be a list where you need to find the section Printers and Faxes. Click on the arrow, which is located next to the section.
5. We have a list of all devices connected to the computer. We are looking for the right to us.
6. Click on it with the right mouse button. Select the Update Driver command.
7. We have a window pops up with options for solving this problem. Choose the one that provides for an update via the Internet. But instead, you can go to the official website of the device and download the updated version of the driver there.

If the driver update does not help, and the device still prints slowly, try setting the print queue management settings. Do the following:

1. Open the properties of the printer. To do this, open the Start. Go to the control panel. Select the section Printers and other equipment. Click the right mouse button on the image of the device. We will open a context menu.
2. Now we are looking for the Advanced tab. Go to her.
3. To speed up printing, check the Use print queue option.
4. In addition, we mark the option Start printing immediately.

Attention! If this does not help, you should check your computer for viruses. All important files are located in the Windows / System 32 folder. This is where we are looking. If the required file is infected with a virus, delete it, and put another in its place.

But also the cause of slow typing can be breakage. This is especially true for printers that use powder. The latter is heated by heat, and stored on paper. But if the temperature exceeds the permissible maximum, the printer needs time to cool down, and it will not be able to print yet. If you have this problem, you will have to contact the service center.

If none of the methods helped, or the device is broken, it is better to contact the service center. Do not repair parts yourself.